+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Balance
- Calorimeter
- Climate Measurement
- Conductivity Measurement
- Density Determination
- Lab Reactors
- Material Testing
- Force Measurement
- Accessories
- Bending Devices
- Data transfer software AFH FAST for Digital force gauge
- Digital force gauge FC
- Digital force gauge FH-EXT
- Digital force gauge FH-M
- Digital force gauge FH-S with screw-in tension clamp
- Digital force gauge FK
- Digital force gauge FL-M
- Digital force gauge FL-S
- Digital force gauge FS
- Handles
- Hardness Comparison Plates
- Hardness Tester
- Mechanical force gauge FA
- Sauter Software
- Sensor
- Spring balances 287
- Spring balances 289
- Tension Clamps
- Test stand set TVL
- Test stand TVL-XLS, manual
- Test stand TVL, manual
- Test stand TVP
- Tomb stone tester FL-G
- Torque Gauge
- Upgrade set test stand TVL-XL
- Hardness Measurement
- Surface Analysis
- Thickness Measurement
- Force Measurement
- Melting Point Determination
- Multiparameter Measurement
- Oxygen Measurement
- pH Measurement
- Thermometer
- Timing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Analytical Measurement and Testing
- Life Science
- promotions
- Ultra Violet Sanitisation
Digital force gauge FL-S
Universal digital force gauges with integrated measuring cell.
- Turnable display with backlight
- Can be mounted on all SAUTER test stands
- Metal housing
- Selectable measuring units: N, kN, kg, oz, lb
- Real time or Peak Hold Mode to observe transcients or capture peaks
- Capacity display: A bar lights up to show how much of the measuring range is still available
- Measuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
- Internal memory for up to 500 measurements
- Continuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)
Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)
Digital force gauge FL-S
PART NO.6-FL50
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 50|| ||50||50 N||0.02|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 50
Compressive force measurements
Tensile force measurements
Test stands
0
3
3
1
Price: €570.00
Out of Stock
PART NO.6-FL5
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 5|| ||5||5 N||0.002|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 5
Compressive force measurements
Tensile force measurements
Test stands
0
3
0
1
Price: €570.00
Out of Stock
PART NO.6-FL200
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 200|| ||250||250 N||0.1|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 200
Compressive force measurements
Tensile force measurements
Test stands
0
2
5
1
Price: €570.00
Out of Stock
PART NO.6-FL20
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 20|| ||25||25 N||0.01|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 20
Compressive force measurements
Tensile force measurements
Test stands
0
3
2
1
Price: €570.00
Out of Stock
PART NO.6-FL1K
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 1K|| ||1000||1,000 N||0.5|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 1K
Compressive force measurements
Tensile force measurements
Test stands
0
2
7
1
Price: €650.00
Out of Stock
PART NO.6-FL100
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 100|| ||100||100 N||0.05|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 100
Compressive force measurements
Tensile force measurements
Test stands
0
2
4
1
Price: €570.00
Out of Stock
PART NO.6-FL10
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 10|| ||10||10 N||0.005|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 10
Compressive force measurements
Tensile force measurements
Test stands
0
1
1
1
Price: €570.00
Out of Stock
PART NO.6-FL500
79556||79750||81141||81623||81854||79274||81780||79952||81627||79480||81926||79075||81787||81557||81658||79808||81048||79089||79550||81311||78960||79404||81657
Power supply||Flow rate||Max. measured value N||For single-channel pipettes||Readability N||No. of pipettes||Runtime||No. of stirring positions||Type of display||Heating capacity||No. of cones||Min. capacity||Length blades||With humidity control||For multi-channel pipettes||No. of deepenings/ chambers||Material housing||Type of rack||Type of door||Material stopcock||Min. filter Ø||IP code||PK
FL 500|| ||500||500 N||0.2|| || ||Digital|| ||Metal|| || || || || || || || || || || || ||1
FL 500
Compressive force measurements
Tensile force measurements
Test stands
0
2
6
1
Price: €570.00
Out of Stock